•
Only replacement parts supplied or recommend by the manufacturer/
distributor shall be used.
•
Do not allow more children, as product may become unstable.
•
Do not allow any children, animals or other object to be placed under or
near the product while child is on it.
•
The product must be assembled by an adult.
•
Before making adjustments to the product ensure that child's body is clear
of any moving parts.
•
Never use this product on an elevated surface not intended for this product.
•
A list of compatible elevated surfaces (e.g. stands) shall be provided as appli-
cable.
•
To avoid scalding by hot water, position the product in such a way to pre-
vent the child from reaching the source of water.
•
Always check the water temperature before bathing the child.
•
Always check the stability of the product before use.
•
Do not use the product if any components are broken or missing.
•
Do not use replacement parts or accessories other than those approved by
the manufacturer.
•
Always ensure the attachment device(s) are correctly fitted to the bathtub.
•
Only use non-standalone bath seat in a compatible children's bathtub.
•
Always check the attachment and the stability of the non-standalone bath
seat on the bathtub.
WARNING—DROWING HAZARD
(a) Children have drowned while bathing.
(b) Children can drown in as little as 2 cm of water in a very short time.
(c) Always remain in contact with your child during bathing.
(d) Never leave your baby unattended in the bath, even for a few moments. If
you need to leave the room, take the baby with you.
If suction cups are used:
(e) Always ensure the suction cups are well adherent to the bath tub.
Babies and young children are at risk of drowning when being bathed.
13
EN