Setting The Density Unit And Density Value; Setting The Temperature Unit - WIKA DMSU21SA Manual De Instrucciones

8. Configuration via display and operating unit
8.5.4

Setting the density unit and density value

1. Open the operating menu with [↵].
Select "Basic setting" and confirm with [↵].
EN
2. Select "Application" and confirm with [↵].
3. Select "Level" and confirm with [↵].
4. Select "Density" and confirm with [↵].
5. Select "Density unit" and confirm with [↵].
6. Select unit and confirm with [↵].
» Density unit is set.
7. Select "Density value" and confirm with [↵].
8. Set digit using [▲] [▼] and confirm with [↵]. The cursor moves
to the next digit. Repeat for each digit.
»Density value is set.
8.5.5

Setting the temperature unit

Temperature unit °C and °F selectable.
1. Open the operating menu with [↵].
Select "Basic setting" and confirm with [↵].
2. Select "Application" and confirm with [↵].
3. Select "Sensor temp." and confirm with [↵].
4. Select temperature unit and confirm with [↵].
»Temperature unit is set.
36 WIKA operating instructions, model DMSU21A