Kohler K-T10087 Guia De Instalacion página 3

Apply supplied
lubricant.
1. Install the Spout Shank
IMPORTANT! Use care when installing the spout to avoid scratching the finish.
Lubricate the O-rings using the supplied lubricant.
Secure the spout shank to the center post of the valve using the 3 supplied screws.
Determine the thickness of the finished wall.
NOTE: If the finished wall is 1/4" (6 mm) to 5/8" (1.6 cm) thick, use #1085746
hardware kit.
NOTE: If the finished wall is 5/8" (1.6 cm) to 1-1/4" (3.2 cm) thick, use #1085745
hardware kit.
Thread the brass bushings from the correct kit onto each valve with a 1-1/8"
socket wrench.
Slide a spline adapter onto each valve.
Secure each spline adapter with a screw.
Kohler Co.
Bushing
Spline Adapter
Screw
Spout Shank
Screws
3 1085648-2-A