Bluetooth Mode; Aux Mode - NGS SKYLINE Manual Del Usuario

USER'S MANUAL

BLUETOOTH MODE

• Turn on the speaker and then switch to Bluetooth Mode
with a "Bluetooth mode" prompt tone and indicator
flashes in blue. Keep the speaker and Bluetooth enabled
device within 20-30 feet or less of each other during
paring process. Different environments may affect the
transmission distance;
• Set your mobile phone or the Bluetooth enabled device to
search for Bluetooth devices;
• When the Bluetooth enabled finds the speaker, select "NGS
SKYLINE" from the list of found devices;
• If required, enter the password "0000". Select OK or YES to
pair the two units;
• After a successful pairing, the indicator will light up in blue
color.
4

AUX MODE

• Keep the unit powered on. Plug one end of the 3.5mm AUX
cord to the headphone jack on your device;
• Plug the other end of the 3.5mm AUX cord into the AUX jack
on the speaker;
• It successfully joins into the AUX Mode along with indicator
lights up in Green color.
• Use the connected device's audio controls for music
playback.
USB PLAYBACK MODE
• Turn on the unit. Push USB disk with MP3 music(s) into USB
port, it will switch to USB Playback Mode and then start to
play music automatically.