Safety Precautions - SPX OTC 5018 Lista De Partes E Instrucciones De Funcionamiento

Parts List & Instructions
Refer to any operating instructions included with the product for detailed information about
operation, testing, disassembly, reassembly, and preventive maintenance.
Items found in this parts list have been carefully tested and selected by OTC. Therefore:
Use only OTC replacement parts!
Additional questions can be directed to the OTC Technical Services Department.
CAUTION: To prevent personal injury and/or damage to the equipment,
•
Wear eye protection that meets ANSI Z87.1 and OSHA standards.
•
If the operator cannot read English, operating instructions and safety precautions
must be read and discussed in the operator's native language.
– Si el operador no puede leer inglés, las instrucciones de operación y las
precauciones de seguridad deberán leerse y comentarse en el idioma nativo del
operador.
– Si l'utilisateur ne peut lire l'anglais, les instructions et les consignes de sécurité
doivent lui être expliquées dans sa langue maternelle.
•
Never exceed the rated lifting capacity of the clutch handler.
•
Never move the clutch handler with the load any higher off the ground than necessary.
•
Move the clutch handler cautiously around corners because it could tip.
•
Lowering the lift arm too quickly could cause equipment damage. SLOWLY turn the
hydraulic control valve counterclockwise to release hydraulic pressure.
•
Use only those adapters and replacement parts provided by the manufacturer.
•
Never modify the unit or adapters.
•
Stay clear of the clutch handler's pinch points as you raise and lower the lift arm.
Item
No.
24
25
26
l l l 24, 25, 26
l l

Safety Precautions

Form No. 107299, Sheet 1 of 3, Back
No. 515685 Head Assembly
Part
No. Qty.
511995 1 Lock Pin
214942 1 Hex Locknut
509223 1 Compression Spring
Description