Safety Instruction - X-Rite DensiEye Guía De Introducción Rápido

Qui c k Start Gui d e
E N G L I S H
1. Safety instructions
The X-Rite DensiEye must not be used in environments where there is a risk of explosion.
The DensiEye must not be exposed to strong electromagnetic fields.
The DensiEye must only be operated at ambient temperatures between 10°C and 40°C with a relative air humidity of 20% to 80% (non-condensing).
The DensiEye must only be stored at ambient temperatures between -20°C and 70°C with a relative air humidity of 5% to 90% (non-condensing).
The DensiEye must not be exposed to direct sunlight.
The DensiEye should be protected against chemical substances, corrosive vapors, strong vibrations and mechanical influences.
The DensiEye should always be transported in the original packaging.
The DensiEye must not be opened. The warranty is invalidated immediately on unauthorised opening.
Only genuine X-Rite accessories and spare parts may be used.
The DensiEye should only be used by trained personnel.
The samples being measured should be placed on a stable measuring base.
The plastic device casing can be cleaned using a damp cloth and a small amount of soap.
Never short-circuit the batteries!
Always replace both batteries at the same time.
Dispose of batteries in accordance with regulations.
2
®
X-Rite DensiEye ™ Quick Start Guide