KNOVA KN 5025 Manual De Instrucciones página 5

TRACK MODE OPERATION
START
Setting target torque
Current torque value
Current torque value
Buzzer
Buzzer
Note:
1. If
wrench has been torqued to more
than 110% of maximum torque.
2. When 90% of the target torque is
reached, the green LED will
illuminate.
3. When the target torque has been
reached, the red LED will also
illuminate.
(System initiate)
*Note 1
Apply torque
Reached 90%
of target torque
*Note 2
Green LED
Reached 90% of target torque
Reached target torque
*Note 3
Red LED
Approached target torque
appears, it means this
PEAK HOLD MODE OPERATION
START
(System initiate)
Setting target torque
Apply torque
Released
Current max. value
torque
(Peak hold)
Reached 90% of target torque
Buzzer
Buzzer
Note:
1. If
wrench has been torqued to more
than 110% of maximum torque.
2. When 90% of the target torque is
reached, the green LED will
illuminate.
3. When the target torque has been
reached, the red LED will also
illuminate.
*Note 1
Apply
*Note 2
Green LED
Reached 90% of target torque
Reached target torque
*Note 3
Red LED
Approached target torque
appears, it means this