Canon FAX-JX500 Guia Del Usuario página 71

2
Open the Printer Cover.
3
Gently remove the jammed paper inside the
fax.
4
Press [Stop].
The fax returns to standby mode.
If the Power Disconnects Unexpectedly
The date and time setting on your device and all documents stored in memory* will be kept.
*All documents stored in memory will be deleted for the FAX-JX200/JX201 models.
If the power disconnects, the following will apply:
You will not be able to send or receive faxes or make copies.
If a telephone is connected to the machine, you can receive voice calls.
Whether you are able to make voice calls or not depends on your telephone type.
Paper Feeding Problems
Paper Does Not Load
Cause
The Multi-Purpose Tray may contain
too many sheets.
Paper may not be loaded correctly.
Paper is Loaded Skewed (Printing is Skewed.)
Cause
Paper may not be loaded correctly.
Make sure the paper stack in the Multi-Purpose Tray does not exceed the paper
limit mark ( ) (see the Easy Setup Instructions).
Make sure the paper stack is loaded properly in the Multi-Purpose Tray, and that
the paper guide is adjusted correctly (see the Easy Setup Instructions).
Make sure the paper stack is loaded properly in the Multi-Purpose Tray, and
that the Paper Guide is adjusted correctly (see the Easy Setup Instructions).
Make sure the right edge of the paper stack is aligned with the right side of
the Multi-Purpose Tray and the Paper Guide is aligned with the left edge of
the stack (see the Easy Setup Instructions).
Make sure the paper exit path is clear.
Action
Action
Troubleshooting 67