DAB/FM/CD/AUX/BT
Press the DAB/FM button on the remote control or SOURCE button
repeatedly on the main unit to select different sources.
Adjusting the antenna
The antenna at the rear panel of the unit should be extended to ensure a
good DAB/FM reception. Alter the antenna position for the best reception.
DAB Radio Operation
The first time the DAB mode is selected, it will automatically scan for
available DAB stations. Wait until the scanning has finished. The display will
show the scanning progress. After scanning it will tune to the first station.
Auto scan (DAB)
1.
Turn on the unit in DAB mode.
2. Press the SCAN button to start auto-scanning the available stations.
Manual scan (DAB)
1.
Turn on the unit in DAB mode.
2. Press the MENU button to access the menu control.
3. Turn and press the Select dial or use the TUNE
on the remote control until "Manual tune" is displayed and then press
the SELECT button.
4. Turn and press the Select dial or use the TUNE
on the remote control to select the desired channel (5A-13F).
5. Press the SELECT button to confirm.
6. To select another channel (5A-13F), Turn and press the Select dial or use
the TUNE
or TUNE
the SELECT button to confirm.
7. When the station is found, press the SELECT button to select.
8. To quit manual scan, press the MENU button.
Tuning (DAB)
Turn and press the Select dial or use the TUNE
display the information of the next station. Then press the SELECT button to
tune to this station within a few seconds.
button on the remote control and then press
or TUNE
or TUNE
button
or TUNE
button
button to
EN
35