Technical Data - YATO YG-04250 Manual Del Usuario

If the limestone deposits have been accumulated in the tank of water coat, precipitated of water as so called "stone", you should
remove them. Stone deposits reduce the performance of the device. Too large a buildup of sediments can lead to damage to the
product, therefore, you should regularly remove them.
The tank of water coat should be fi lled with water, and then you should add vinegar or the product for removing lime deposits.
After complete removal of the deposits, you should empty the tank of water coat of cleaning solution, and then the rinse its Interior
repeatedly with clean water.
Attention! If the fi ltered water will be used in the product, this should signifi cantly reduce the formation of calcareous deposits.
Storage of the product
If the product is not intended for use for an extended period of time, you should completely remove food, and clean the tank
Interior thoroughly.
Store the product indoors, protect against dust, dirt, and moisture. It is recommended to store the product in the factory packaging.
Store the product in its working position. Do not install the products in layers. Do not place anything on the product.

TECHNICAL DATA

Parameter
Catalog number
Rated voltage
Rated frequency
Rated power
Insulation class
Rated capacity
Working temperature
Net weight
O R I G I N A L
GB
Unit
[V~]
[Hz]
[W]
[l]
[ O C]
[kg]
I N S T R U C T I O N S
Value
YG-04250
220 - 240
50 / 60
400
I
9
35 ÷ 85
4.3
9