Sauder Hutch 109871 Instrucciones De Montaje página 11

7
LEFT
END (B)
LOWER
BACK (F)
- Fasten the SHELF (D) and LOWER BACK (F) to the LEFT END (B). Tighten the TWIST-LOCK
FASTENERS in the SHELF.
NOTE: You cannot tighten the MINI TWIST-LOCK
- Fasten the SHELF (D) to the UPRIGHT (G) as shown. Use two 1- -7/8" FLAT HEAD SCREWS (LL) through the
SHELF and into the pre- -drilled holes in the edge of the UPRIGHT.
- Fasten the RIGHT END (A) to the SHELF (D) and LOWER BACK (F) as shown. Tighten the TWIST-LOCK
FASTENERS in the SHELF.
NOTE: You cannot tighten the MINI TWIST-LOCK
- Fasten the RIGHT END (A) to the TOP (C) as shown. Use two 1- -7/8" FLAT HEAD SCREWS (LL) through the
TOP and into the pre- -drilled holes in the edge of the RIGHT END.
SHELF (D)
Use the 1- -7/8"
FLAT HEAD
SCREWS here.
R
R
www.sauder.com/services
UPRIGHT (G)
TOP (C)
RIGHT
END (A)
1- -7/8" FLAT HEAD SCREW (LL)
(4 used in this step)
FASTENERS in the LOWER BACK until step 12.
FASTENERS in the LOWER BACK until step 12.
Use the 1- -7/8"
FLAT HEAD
SCREWS here.
R
R
109871