Sauder Hutch 109871 Instrucciones De Montaje página 12

8
ANGLE
BRACKET (II)
1- -1/8" PAN HEAD SCREW (NN)
(4 used to fasten the MAGNETIC CATCHES)
- Fasten six ANGLE BRACKETS (II) to the TOP (C) as shown. Fasten five ANGLE BRACKETS (II) to the
SHELF (D) as shown. Use a 9/16" LARGE HEAD SCREW (RR) through each BRACKET and into the
pre- -drilled holes in the TOP and SHELF.
NOTE: Be sure to position the BRACKETS as shown. Be sure the edges of the BRACKETS are even
with the edge of the SHELF. Follow the diagram closely.
- Fasten two MAGNETIC CATCH BRACKETS (EE) to the TOP (C) as shown. Use two 9/16" LARGE HEAD
SCREWS (RR) through each BRACKET and into the pre- -drilled holes in the TOP.
NOTE: Be sure to position the BRACKETS as shown. Follow the enlarged diagram closely.
- Now, fasten two MAGNETIC CATCHES (FF) to each MAGNETIC CATCH BRACKET (EE) on the TOP (C) as
shown. Use a 1- -1/8" PAN HEAD SCREW (NN) through each MAGNETIC CATCH and into the BRACKET.
NOTE: Be sure to position the MAGNETIC CATCHES as shown. Follow the enlarged
diagram closely.
109871
MAGNETIC
CATCH (FF)
TOP (C)
SHELF (D)
www.sauder.com/services
MAGNETIC
CATCH
BRACKET (EE)
9/16" LARGE HEAD SCREW (RR)
(15 used in this step)