Preparing The Aircraft - DJI Matrice 200 V2 Serie Guia De Inicio Rapido

Using the Remote Controller
The Stick Mode is set to Mode 2 by default. In Mode 2, the left stick controls the aircraft's elevation and heading, and the
right stick controls the aircraft's forward, backward, and lateral movements. To adjust the FPV camera, press and hold the C2
Button and rotate the left dial.
Left Stick
Turn Left
For more information about how to connect and use the remote controller, please refer to the user manual.
You can change the stick mode and customize the C1-C4 and BA-BH buttons' functions in the DJI Pilot app.

4. Preparing the Aircraft

Unfolding the D-RTK Antennas (for M210 RTK V2 only)
Unfold the D-RTK antennas and then turn the knob tightly in the direction indicated by the lock icon
2
For the aircraft to take off, the D-RTK antennas must be fully unfolded and securely locked.
Installing the Landing Gears
Right Stick
Up
Down
Turn Right
1
Forward
Backward
Left Right
Unfolding the Aircraft
Unfold the frame arm, slide the arm lock to the end of the frame
arm, then rotate it about 90° until the silver line lies within the
range of the icon.
1
FPV Camera
.
3
2
5