cecotec HidroBoost 3200 Induction Pro Manual De Instrucciones página 21

building or in or near an explosive environment.
• Do not spray electrical apparatus and wiring.
• Never disconnect the high-pressure discharge hose
from the machine while the system is pressurized. To
depressurize the machine, turn the power and water
supply off, then press the trigger 2~3 times.
• Do not activate the safety lock while the machine is
being used.
• Turn on the spray lance within one or two minutes
after the machine has been started. Otherwise, the
temperature of the circulating water within the
machine will soon rise to a critical point, which will
cause damage to the sealing rings inside the machine.
• The anti-impurities water inlet filter must be inspected
regularly, so as to avoid blockage and restriction in
the water supply to the pump.
• Never operate the machine unless all components
are properly connected to the machine (handle, gun/
wand assembly, nozzle, etc.).
• Always turn the water supply "ON" before turning the
pressure washer "ON." Running the pump dry causes
serious damage.
• Do not operate the pressure washer without the anti-
impurities water inlet filter. Make sure to keep this
filter clear of debris and sediment.
• This machine has been designed for use with the
specific pressure washer soap. It is suggested to use
specific soap for each type of surface (NOT INCLUDED).
• To ensure a safe operation, use only original spare
parts provided or approved by Cecotec.
• This device is not suitable for children.
• This appliance cannot be used by children or persons
HIDROBOOST 3200 INDUCTION PRO
ENGLISH
21