Cleaning And Maintenance - cecotec HidroBoost 3200 Induction Pro Manual De Instrucciones

ENGLISH
the efficiency of a 25-degree stream. This turns the narrow
high-impact stream into a cone-shaped one that cleans
thoroughly larger areas.

5. CLEANING AND MAINTENANCE

• Use specific soap or cleaning agents for pressures washers.
• The machine shall be disconnected from its power source by removing the plug from the
socket-outlet during cleaning or maintenance.
• Do not store the pressure washer outdoors or where it could freeze. The pump could be
seriously damaged.
• The anti-impurities water inlet filter must be inspected regularly,
so as to avoid blockage and restriction in the water supply to
the pump
NOZZLE CLEANING
A clogged or partially clogged nozzle can cause a significant reduction of water coming out of
the nozzle and cause the unit to pulsate while spraying. To clean out the nozzle:
• Turn off and unplug the unit.
• Turn off water supply. Relieve any pressure trapped in the hose by squeezing the trigger
2-3 times.
• Separate the lance from the gun.
• Using the provided cleaning kit, or an unfolded paper clip, insert the wire into the nozzle
hole and move back and forth until debris is dislodged.
• Remove debris by back-flushing water through the nozzle. To do this, point the end of a
garden hose (with water running) to the nozzle's end for 30-60 seconds.
26 HIDROBOOST 3200 INDUCTION PRO