Fault Rectification - Silvercrest SKM 500 B2 Instrucciones De Uso

4) Slide the cutting knife
knife
5) Place the drive shaft adapter
disk
6) Place the disk adapter
7) Close the lid
Store the appliance with the stowed accessories, the blender attachment and the
citrus press attachment in a clean and dust-free location.
Fault rectification
DEFECT
The appliance
does not work.
The appliance
stops suddenly.
The motor runs, but
the accessory parts
do not rotate.
SKM 500 B2
with the knife guard
over the drive shaft
) at the side next to the drive shaft
with the disk fitted onto the drive shaft
and slide the pusher
CAUSE
The plug is not
connected.
The appliance is not
correctly assembled
and engaged.
The appliance is
defective.
The lid
appliance may have
become loose when
processing hard
ingredients.
The appliance is
defective.
The drive shaft
not inserted properly.
fitted and the kneading
onto the emulsifying disc
and 2 disks (e.g. cutting
in the mixing bowl
into the filling shaft
SOLUTION
Insert the plug into a mains
power socket.
Check the assembly of the
appliance and ensure that all
marks are correctly aligned.
In this case, contact the
Customer Services.
of the
Replace the lid
In this case, contact the
Customer Services.
Check the assembly of the
is
drive shaft
.
and shredding
.
.
.
.
.
GB │ IE │ 57 ■