Peristaltic Pump Running In; Periodic Maintenance; Disposal - Sencotel 121c Manual De Empleo

7.6 Peristaltic pump running in

The procedure ti perform the pump tube running in is the
following:
- With the machine in Stop
selection key until the message CLE appears in the display
in order to select the cleaning/loading/emptying function.
-Keep pressing the selection key
the message rOd, and wait for the tube running in
At the end of the operation the machine stops automatically
STOP .

7.7 Periodic maintenance

The apparatus should be reviewed
periodically, (at least once a year), by a
specialized technician. This periodic
verification serves to maintain a high level of
safety of the machine and all of its installed
components. In the case of a worn out
component, it should be replaced with a new
original replacement.
In the case of a faulty or worn out machine
component the use of the machine is totally
forbidden. It is forbidden for the operator to
perform periodic maintenance.

8. DISPOSAL

Electrical and electronic equipment must be
disposed of in accordance with the European
Directive 2002/96/CE.
CANNOT be eliminated like normal urban
solid waste but should be independently
collected to optimize the recuperation and
recycling of manufactured materials.
The crossed off rubbish bin appears on all
products as a reminder of the obligation to use
selective waste collection. Properly considering
all options relating to the disposal of old products
will contribute to the protection of the
environment
23
, open the lever and press the
until the display shows
This equipment
SL320003270 Ed 03_EN