Checking The Charge Level; Handling And Operation; Charging Mobile Devices With The Power Bank - Silvercrest SPB 6000 A1 Instrucciones De Uso E Indicaciones De Seguridad

Option B
♦ Connect the Micro-USB cable
on the Power Bank.
♦ Connect the other end of the micro-USB cable to a USB pow-
er supply (not supplied).
A rough estimate of the current charge level is shown during
charging by means of the charge level LEDs
CAUTION!
► Do not use both charging options simultaneously as this
could damage the power bank or your mains adapter.

Checking the charge level

You can also check the charge level of the Power Bank when
it is not charged or while it is being used for charging.
♦ Press the ON/OFF button
current charge level of the Power Bank for about 20 seconds.
LED display
All LEDs are on
Three LEDs are on
Two LEDs are on
One LED is on
One LED is flashing
All LEDs off

Handling and operation

Charging mobile devices with the
Power Bank
You can charge up to three devices at a time using the Power
Bank. When all three outputs are being used, the total charg-
ing current may not exceed 2.1 A.
♦ Connect a suitable USB charging cable to the corresponding
USB output (
being charged.
♦ Then connect the USB charging cable to the device to be
charged. The charging process starts automatically.
SPB 6000 A1
briefly. The LEDs
or ) of the Power Bank for each device
to the Micro-USB input
.
show the
Charge level
100%
75–99%
50–74%
20–49%
< 20%
GB │ IE
0%
│
21 ■