Parameter Settings - Parker StarlettePlus-E Manual De Uso

5 Control
QS
Main power switch
UP button: press to increase the value of a selected parameter
DOWN button: press to reduce the value of a selected param-
eter
esc
ESC button :returns to the previous level
SET button : one single press to see the alarms, press for more
set
seconds to enter Menu (Service e Factory)
(lit) Dew point correct
(Flashing) warning dew point high/low
(off) alarm dew point
(lit) Condensate drain ON
(off) Condensate drain OFF
(lit) Multiple alarms
(Flashing) Warning "maintenance"
Degree

5.1 Parameter settings

There are two levels of protection for parameters:
a) User (U): with immediate access, User-changeable;
b) Password protected Factory/Service (F/S): password required for ac-
cess; Factory-set parameters.
Condensate drain
There are two operating modes:
a) TIMED (TIm) - with draining at intervals and settable time;
in this confi guration keep pressed to force the drain to work;
b) EXTERN (CON) - if there is an external drain.
For chosing the set proceed as follows::
English
set
Press button over 5 seconds to enter on menu U.
Using buttons and select "CHd" and press
Using buttons and select "TIm" or "CON" .
esc
Press to confi rm and exit.
In the same way it is possible to change interval and discharge times of
the drain.
Parameter table
Code Defi nition
dON Time ON Drain (sec.)
dOFF Time OFF Drain( 1=10 sec.)
CHd Confi guration drain
ALC relay alarm/warning
OFF = relay energised for alarms/warnings
ON = relay energised only alarms
ST1 = relay energised for No alarms/warnings present
ST2 = relay energised for No alarms present
Flow Chart
set
>5 sec.
Menu
User
esc
CON
SPS010/0250 (60Hz)
Alarms/Warnings
set
to confi rm.
When an alarm is ON, the "alarm/warning code" fl ashing on display.
Multiple alarms appear in sequence. The symbol appears
In any case you can press
and .
Default Min Max.
Code
5 1 60
---
12 2 270
HdP
TIm TIm CON
LdP
ON - -
DSE
H
L
esc
Pemere per uscire.
set
CHd
Code 1
Alarm
Warning
set
esc
TIm
set
to see the alarms, using the buttons
Description alarm / warning
No alarms present
Alarm High Dew point
Alarm Low Dew Point
Alarm sensor B1 faulti/disconnected
Warning High Dew point
Warning Low Dew point
Flow Chart
<5 sec.
Code 2 Code....
Alarm Alarm
Warning Warning
esc esc
.
.
3 / 6