geberit ESG 3 Manual De Operación página 36

EN
Preparing the Geberit electrofusion machine
ESG 3 for serial welding
For serial welding, a maximum of three Geberit electrofusion
couplings or Geberit electrofusion tapes ≤ ø 110 mm may
be connected to one another.
In the case of serial welding of parts with different
dimensions, please refer to the table on the rear cover page
for the maximum number of parts that may be used.
Serial welding cannot be carried out for Geberit
electrofusion couplings with integrated thermal fuse.
Insert the connecting cables as shown in the sketch
Result
Electrofusion couplings or electrofusion tapes are prepared for
serial welding.
36
B1158-002 © 07-2016
966.473.00.0 (02)