Pre-shared key
(only for
Pre-shared
The same password must be entered on the wireless LAN
access point device.
TKIP
encryption—Select whether Temporal Key Integrity
Protocol (TKIP) is used.
Homepage—Define a home page.
Select
Options
>
Advanced settings
IPv4
settings:
Phone IP address
device),
Subnet mask
(the subnet IP address),
gateway
(the gateway), and
addresses of the primary and secondary DNS server.
Contact your internet service provider for these addresses.
IPv6 settings
>
DNS
address—Select Automatic,
Well-known, or
User
defined.
Ad-hoc channel
(only for Ad-hoc)—To enter a channel
number (1-11) manually, select
Proxy serv.
address—Enter the address for the proxy server.
Proxy port
number—Enter the proxy port number.
Packet data
The packet data settings affect all access points using a
packet data connection.
Packet data
conn.—If you select
in a network that supports packet data, the device registers
to the packet data network. Starting an active packet data
connection (for example, to send and receive e-mail) is quicker.
key)—Enter a password.
and from the following:
(the IP address of your
Default
DNS
address—Enter the IP
User
defined.
When available
and you are
If there is no packet data coverage, the device periodically
tries to establish a packet data connection. If you select
When
needed, the device uses a packet data connection
only if you start an application or action that needs it.
Access
point—The access point name is needed to use your
device as a packet data modem to your computer.
Wireless LAN
Show
availability—Select whether
a wireless LAN is available.
Scan for
networks—If you set
select how often the device searches for available wireless
LANs and updates the indicator.
To view advanced settings, select
settings. Changing wireless LAN advanced settings is
not recommended.
Configurations
You may receive trusted server settings from your service
provider in a configuration message or the settings may be
stored on your USIM card. You can save these settings to
your device, view, or delete them in Configs..
Date and time
See "Clock settings", p. 16 and language settings in
"General", p. 98.
is displayed when
Show availability
to Yes,
Options
>
Advanced
103