Synchronize Data; Connection Manager; Data Connections; Wireless Lan - Nokia N93 Guia Del Usuario

You may receive synchronization settings in a special text
message. See "Data and settings", p. 46.

Synchronize data

In the Sync main view, you can see the different
synchronization profiles.
1 Select a synchronization profile and
Synchronize. The status of the synchronization is
shown on the display.
To cancel synchronization before it finishes, select Cancel.
2 You are notified when the synchronization is complete.
Select Yes to view the log file showing the synchronization
status and how many entries have been added, updated,
deleted, or discarded (not synchronized) in your device
or on the server.

Connection manager

Press , and select
status of data connections or end connections in GSM and
UMTS network and wireless LAN, select
To search for wireless LANs available within range, select
Availab. WLAN.
88
Options
Connect. > Conn. mgr.. To view the
Act. data

Data connections

In the active connections view, you can see the open data
connections: data calls (
or ), and wireless LAN connections (
Note: The actual time invoiced for calls by your
service provider may vary, depending on network
>
features, rounding off for billing, and so forth.
To end a connection, select
all open connections, select
To view the details of a connection, select
The details shown depend on the connection type.

Wireless LAN

The available wireless LAN view shows a list of wireless
LANs within range, their network mode
Ad-hoc), and signal strength indicator.
networks with encryption.
an active connection in the network.
To view the details of a network, select
Create an internet access point
conn..
1 Press , and select
Availab. WLAN.
2 The device searches for wireless LANs within range. Scroll
to the network in which you want to create an internet
access point, and select
), packet data connections (
).
Options > Disconnect. To close
Options > Disconnect all.
Options > Details.
(Infrastructure
is shown for
is shown if your device has
Options > Details.
Connect. > Conn. mgr. >
Options > Define access point.
or