Boston Scientific Precision SC-5312 Manual Del Usuario página 3

Precision Charging
®
System
Charger Model SC-5312
Base Station Model SC-5305
Caution: Federal Law restricts this device to
sale, distribution, and use by or on the order
of a physician.
Together Charger and Charger Base Station
make up the Boston Scientific Charging
System to be used with the Precision
Implantable Pulse Generator (IPG).
Storage, Handling, and
Transport:
• Do not charge while sleeping.
This may result in a burn.
• While charging, the Charger
may become warm. It should
be handled with care.
• Do not expose the Charging System
components to extremely hot or cold
conditions. Do not leave the components
in an automobile or outdoors for long
periods of time.
• If the Charging System is to be stored, the
storage area should be kept at between
10 – 30 ºC (50 – 86 ºF).
• Handle the Charging System with care.
Do not drop the components or submerge
them in water. Although durability testing
has been performed to ensure quality
manufacturing and performance, dropping
the components on hard surfaces or in
water, or other destructive handling, can
permanently damage them.
• Avoid all sources of water that can come
into contact with the Charging System.
• Do not dispose of the Charger or Base
Station in fire.
• External devices to be disposed of per
local regulatory requirements. Please
®
contact your healthcare professional for
information.
Instructions for Use
WARNING: Failure to use the adhesive patch
or the Charging Belt, as shown, may result in
a burn. If you experience pain or discomfort,
cease charging and contact Boston Scientific
if in USA, or your healthcare professional if
outside of USA.
1. Plug the power supply into a standard
electrical outlet, then plug the power
supply connector into the port at the rear
of the Base Station.
9055937-005 REV A Page 3 of 54
Instructions for Use
Precision Charging System