Cisal WAVE WA00025 Información Técnica página 18

ONLY FOR ITEM WA00026
HAND-SHOWER INSTALLATION
- Tighten the hose (2) on the lower outlet of the supply spout tightening the cap with 19 Allen wrench
(insert the gasket (1) between the cap and the connection).
- Assemble the hexagonal counter nut (5), the stainless washer (6) and the gasket (7) on the support
stem of the hand shower.
- Insert the support stem of the hand shower in the hole of the top as shown in fig.B.
- Lock the support stem of the hand shower tightening the nut with cone-shaped seat (9) with Allen
wrench 38 (insert the gasket (8) between top and nut with cone-shaped seat).
- Assemble the cap (10) on the nut with cone-shaped seat (9) and fasten it with the dowel (15) tighte-
ning it with 2 mm Allen wrench.
- Insert the plate (16).
- Insert the hose (4) in the support stem of the hand shower and connect it to the hose (2) (insert the
gasket (3) between the caps of the hoses).
- Assemble the cone-shaped cap (11) on the hose (4) tightening it with Allen wrench 19 (insert the
gasket between the cap and hose).
- Assemble the hand-shower on the cone-shaped cap (11) (insert the gasket (12) between cap and
hand-shower).
18