Cisal WAVE WA00025 Información Técnica página 20

AUTOMATIC DIVERTEN REPLACEMENT
- Unscrew the tightening dowel (1) using a 2
mm Allen wrench and remove the knob (2).
- Remove the plate (3) and unscrew the tighte-
ning dowel (4) using a 2 mm Allen wrench.
- Remove the plate (5) from the supply
spout.
- Remove the supply spout from the support
after loosening the screws (7) with a 3 mm
Allen wrench
- Unscrew the extension (6) and remove the
diverten (8) from the supply spout.
- Once the maintenance is done reassemble
everything proceeding in the opposite direc-
tion.
20