Publicidad
Attach the T-Connectors white wire with the ring terminal to
the vehicle using the #10 screw provided.
7. Carefully pull the trim panels on each side of the vehicle
back and route the T-Connector ends with the green wire
out from behind the left side trim panel, along the threshold
channel and in behind the right (passenger) side trim panel.
8. Repeat steps 4 & 5 for the left (passenger) side using
the T-Connector ends with the Green wire.
9. Confirm correct operation with a test light or by using a
trailer.
10. Secure any loose wires and the T-Connectors black
box using the cable ties (provided). Return the threshold
trim and access covers to their original positions using the
fasteners removed during step 2. Taking care not to pinch
or damage any wires.
Publicidad
