Accessing On-Screen Help; Returning To The Home Screen; Changing The Settings; Important - Philips BiliChek Manual Del Usuario

Accessing On-Screen
Help
From any screen, press the
(Help) key on the BiliChek keypad.
A help message for that action will
appear.
Returning to the Home
Screen
You can return to the home
screen at any point by pressing
the (Home) key. If you return
to the home screen in the middle
of a reading, you must start the
measurement process over.

Changing the Settings

Before you use the BiliChek for the first time, you may review or change
certain factory settings. You can also change any of the settings at a
later time. Choose Setup on the home screen to change settings. At any
time during the setup process, you can press the
bottom right of the keypad to access on-screen instructions.
Home key
(Help) key on the
Help key
BiliChek Keypad
Note: To exit the Setup mode at
any time, press the
key on the bottom left of the
keypad. Any unsaved data will
be lost.

IMPORTANT!

Your institution will determine
which information you are
required to enter.
Setup Selection
Chapter 4. Viewing and Changing Settings
15
(Home)