Good Earth Lighting FP1246-WHG-17LFC-G Guia De Inicio Rapido

READ ENTIRE INSTALLATION PROCEDURE BEFORE YOU BEGIN!
SHUT OFF POWER AT THE CIRCUIT BREAKER OR FUSE PANEL BEFORE REMOVING THE OLD
FIXTURE AND/OR INSTALLING A NEW ONE.
Read entire installation procedure before you begin and save instructions for future reference.
THIS FIXTURE IS DIMMABLE BY SPECIFIC FORWARD PHASE ELECTRONIC (TRIAC) DIMMERS.
Dimmers tested to be compatible with this fixture are the Lutron Skylark
Maestro MACL-153M*,Toggler
® ®
SAL06P* (This list of dimmers does not imply any guarantee or warranty of compatibility with a particular
application. Dimmers not listed do not imply non-compatibility.)
If unsure whether the electrical box is properly grounded, or the box is plastic and has no ground
wire, or are unfamiliar with the methods of properly grounding fixture, consult a qualified
electrician.
TURN POWER OFF AT BREAKER BOX/FUSE BOX. TURN WALL SWITCH TO JUNCTION BOX OFF
5 LIGHT SETTING SLIDE SWITCH
MOUNTING INSTRUCTIONS
To remove the mounting bracket, twist to unlock from the fixture.
Using the box screws (AA), secure the mounting bracket to the junction box (J-Box).
Drywall: If no stud is encountered, insert drywall anchors (CC) in the pilot holes and screw them into place until flushed with surface of drywall. Drive long
screws (BB) into drywall anchor until snug. DO NOT OVERTIGHTEN. NOTE: Main support for mounting plate is provided by attaching to a securely
mounted electrical box. If the electrical box is not properly secured, alternative mounting methods such as toggle bolts (not included) should be used to
secure mounting plate.
Panel de luces LED plano con iluminación en los bordes (Página 5)
Mounting bracket
Support de montage
Soporte de montaje
Support wire hook
Crochets des fils de support
Ganchos de alambre de soporte
LED Flat Panel
Panneau plat à DEL
Panel de luces LED plano
5 Light Setting Slide Switch
Interrupteur à glissière à 5 positions
5 Interruptor deslizante para la configuración de luz
WARNINGS AND CAUTIONS
TGCL-153P*, Lumea LECL-153P*, Caseta
®
AAx2
Panneau plat à DEL à éclairage périphérique (Page 3)
SCL-153P*, Diva DVCL-153P*,
® ®
PD-6WCL*, Eaton Halo
® ®
Slide switch that allows the color temperature of the light to be adjusted
between 5 values: 6500K, 5000K, 4000K, 3000K, 2700K
3A
CCx2 BBx2
SAVE AND ATTACH RECEIPT HERE
Edge Lit LED Flat Panel (Page 1)
Model/Model/Modelo #: FP1246-WHG-17LFC-G
Hardware kit*
Fixture pan
Trousse de quincaillerie*
Kit de aditamentos*
Support du luminaire
Bandeja de la lámpara
AAx2 BBx2 CCx2 DDx3
*Actual hardware may differ from illustration
*Les éléments de fixation réels peuvent
être différents de ceux de l'illustration.
*Los herrajes reales pueden diferir de los
que se muestran en la ilustración
Required
Nécessaire
Obligatorio
Important Safety Information
1. Do not look directly at LEDs for extended period of time.
2. Suitable for INDOOR damp locations.
3. Turn power off before servicing.
4. Do not leave bare wires exposed.
5. Use Minimum 90 °C supply conductors. For additional
electrical requirements, see fixture.
6. DO NOT alter this fixture. It is not manufactured with
replaceable or serviceable parts.
DRYWALL