Dodge Viper 2003-2009
1. Disconnect the negative battery terminal
to prevent an accidental short circuit.
2. Using a small flat blade screw driver,
pry up on center console trim panel.
Be careful not to scratch the trim panel.
(Figure A)
3. Loosen the shifter lock nut below center
console trim panel (Figure A) and
unscrew the shifter knob. (Figure B)
4. Unplug electrical connectors and
remove center console trim panel.
(Figure C)
5. Remove (6) Allen screws from radio/
climate control trim panel and (1) Phillips
screw at the bottom of the panel.
6. Unplug electrical connectors and
remove the panel. (Figure D)
7. Remove (4) screws securing the radio.
Disconnect and remove the radio.
Comtinue to kit assembly page
(Figure A)
Dash Disassembly 99-6505
(Figure B)
(Figure C)
(Figure D)
9