Nice RC2 Instrucciones Y Advertencias Para La Instalación Y El Uso página 16

• With the transmitter in mode I or
➨ 1
not memorized:
Press and hold down key 2 or key 4 on a
transmitter previously memorized in mode
I until you hear a beep (after approx. 5
seconds), then release it.
• With the transmitter in mode II (On/
Off or timer only):
For On/Off with open relay (Off), press the
key to activate it (On), release the key,
press it again and hold it down until you
hear a beep (after approx. 5 seconds),
then release the key.
For timer with open relay (Off), press the
key to activate the relay (On), hold down
the key until the relay is deactivated (Off)
and you hear a beep (after approx. 5
seconds), then release the key
2 After 1 second, press the same key again
and release it precisely during the third
beep
3 After 1 second, press the same key again
and release it precisely during the third
beep
After 1 second, press the same key again
➨ 4
and release it precisely during the third
beep
If you wish to completely erase all the data
5
➨
stored in the memory, press the key again
within 2 seconds and then release it
After a few seconds, 5 beeps will signal
that the memory has been cleared
14 – English
5s
?... 5s