Water Supply Connections - Price Pfister Falsetto 49 Serie Manual Del Usuario

11
11A
11B
11 SECURING HANDLES
Be sure Valves and Levers are in the "OFF" position. Secure handles by holding the
Lever (11B) in place and tighten the Hubs (11A) by rotating them in a clockwise direction.
To remove handles, rotate Hubs (11A) in a counterclockwise direction.
12
12B
12A
12B
12C
12A
12 HOSE CONNECTION TO SPOUT BODY
From underneath sink, push the Center Connector (12A) onto Receiving Tube (12B),
until unable to push any further. Pull down on the quick connect housing (12A). If the
housing and the Inner Collet (12C) separate slightly but do not pull off the Receiving
Tube (12B), the connection is secure.
12C
12A 12A
ENGLISH
13
13C
13B
13E
13A
13A
13B
13 HOSE CONNECTION TO VALVE BODY
Slide the End Connectors (13A) with arrow (13D) pointing up onto the Valve Bodies
(13B). Push the End Connectors (13A) all the way up until completely seated. Be
careful not to damage O-Rings (13C). Place Clips (13E) onto End Bodies (13B) to
secure End Connectors (13A).
14
14B
14A
HOT

14 WATER SUPPLY CONNECTIONS

Connect water Supply Lines (14A) to Faucet Inlets (14B). Hot water supply lines go
into left inlet. Cold water supply lines go into right inlet. (Supply lines not included).
Please follow manufacturer's instructions when installing supply lines.
4
13B
13D
13E
13E
14B
14A
COLD
13C
13A
13D