Suaoki Wireless Cadence Manual Del Usuario página 19

Note:
TOT-DIST, MEMORY and CLOCK cannot be reset.
Backlight
In any MODE and hold [SET]+[MODE], shows the LIGHT ON or LIGHT
OFF, when in LIGHT ON mode, press any key and the backlight turn on
3 seconds.
Q & A
Q1: Opened the back-light, and data display is blurry.
A: This happens due to low power. You need to replace the battery. The
data stored in this device would be cleared when you replace this
device with new batteries. Before removing the batteries, note down
the current total distance and total ride time. You can enter the data
manually when you set the bike computer.
Q2: No data display when testing cadence.
A: You cannot not test the cadence alone without testing the speed.
For example, rotating the crank arm with bike unmoved cannot get any
results. This device could not display anything.
Q3: Black/dark display
A: This happens because device was exposed to direct sunlight for too
long. You need to cool down this device by moving it to shaded area.
Q4: LCD display responds slowly
A: Very low temperature. Move to warmer place.
Q5: Clear display, but no data
A: This happens due to power supply issues, such as low battery
capacity, or battery inserted upside down. In this case, simply replace
the battery or insert the battery correctly.
Q6: No real-time speed display or the displayed data is
wrong
A: There are several possible ways to look at and solve this problem:
EN-17