Operating; When Taking A Break; Maintenance - Chicago Pneumatic CP 0009 Instrucciones De Seguridad Y De Funcionamiento

Safety and operating instructions
Start and stop
CP 0014
Start the machine by squeezing the trigger while
firmly holding the handle.
CP 0014
Stop the machine by releasing the trigger. The
trigger returns automatically to the stop position.

Operating

Starting a cut
Stand in a stable position with your feet well away
♦
from the inserted tool.
Press the machine against the working surface
♦
before you start.
♦ Start collaring at such a distance from the edge
that the machine is capable of breaking the
material without levering.
Never try to break off too large pieces. Adjust the
♦
breaking distance (A) so that the inserted tool
does not get stuck.
16
CP 0009
CP 0009
A
Breaking and drilling
Use protective shoes, gloves, helmet, ear
♦
protectors, and impact resistant eye protection
with side protection.
Avoid working in extremely hard materials for
♦
example granite and reinforcing iron (re-bar)
which would cause substantial vibrations.
♦ Check regularly that the machine is well
lubricated.
♦ When the machine is lifted, the start and stop
device must not be activated.
♦ Any form of idling, operating without insertion
tool or operating with an uplifted machine must
be avoided.
Stand firmly and always hold the machine with
♦
both hands.
Hold the inserted tool firmly against the work
♦
surface before starting the machine.
Let the machine do the work; do not press too
♦
hard.

When taking a break

♦ During all breaks you must place the machine in
such a way that there is no risk for it to be
unintentionally started.
In the event of a longer break or when leaving the
♦
workplace: Switch off the power supply and then
bleed the machine by activating the start and stop
device.

Maintenance

Regular maintenance is a basic requirement for the
continued safe and efficient use of the machine.
Follow the maintenance instructions carefully.
Before starting maintenance on the machine,
♦
clean it in order to avoid exposure to hazardous
substances. See "Dust and fume hazard".
Use only authorised parts. Any damage or
♦
malfunction caused by the use of unauthorised
parts is not covered by warranty or product
liability.
When cleaning mechanical parts with solvent,
♦
comply with appropriate health and safety
regulations and ensure there is satisfactory
ventilation.
For major service of the machine, contact the
♦
nearest authorised workshop.
9800 0547 90c | Original instructions
CP 0009, CP 0014