Techem ultra S3 Instrucciones De Funcionamiento página 16

Code Description
E-9 Warning: Battery capacity is running out
Reading out data / programming
!
Prerequisites:
Techem Bluetooth optical head or the Diehl metering Bluetooth optical head.
The IZAR@SET software for reading out and configuring the standard functions
You can change the following on the Techem notebook with IZAR@SET software:
Due date Due date loop 1.1
M-bus primary address
Fold-out side key
Main loop
5
1 Accumulated energy
2 Volume
3 Flow rate
4 Performance
5 Inlet / outlet temperature
Due date loop
6
1.1 Due date 1 Date
1.3 "Accd 1A"
2.2 Future date Due date
3.2 Due date 1 Previous year's energy
4.1 Due date 2 Date
4.3 "Accd 2A"
5.2 Future date Due date
6.2 Due date 2 Previous year's energy
!
If an installed pulse input module exists, further information loops.
16
Information loop 3.1 and 4.1
6 Temperature difference
7 Operating days
8 Error status
9 Display test
1.2 Due date 1 Energy
2.1 "Accd 1"
3.1 Due date 1 Previous year's date
3.3 "Accd 1L"
4.2 Due date 2 Energy
5.1 "Accd 2"
6.1 Due date 2 Previous year's date
6.3 "Accd 2L"