Techem ultra S3 Instrucciones De Funcionamiento página 17

Information loop
7
1.1 Current date
2.1 "SEC_Adr"
3.1 "Pri_Adr 1"
4.1 "Pri_Adr 2"
5 Installation location [cold pipe/ hot pipe]
6.1 Pulse input 0
7.1 Module "Port 1"
8.1 Module "Port 2"
9.1 "F02-002" software version
Pulse loop
8
1.1 Pulse input 1
1.3 Pulse per increment
2.2 Cumul. pulse input 2 value
3.1 Pulse output 1
4.1 Pulse output 2
1.2 Current time
2.2 Secondary address
3.2 Primary address 2
4.2 Primary address 2
6.2 Volume pulse value
7.2 No. gest. module on port 1
0 = No module
1 = M-bus module
4 = Pulse input module
5 = Pulse output module
8.2 No. gest. module on port 2
0 = No module
1 = M-bus module
4 = Pulse input module
5 = Pulse output module
9.1 Check sum
1.2 Cumul. pulse input 1 value
2.1 Pulse input 2
2.3 Pulse per increment
3.2 Value pulse output 1
4.2 Value pulse output 2 [heat meter / cold
meter]
17