Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
CORDLESS GRASS SHEAR
SAFETY WARNINGS
WARNING! IMPORTANT READ CAREFULLY all
safety warnings and all instructions BEFORE USE.
Failure to follow the warnings and instructions may
result in electric shock, fire and/or serious injury.
Save all warnings and
instructions for future reference.
General instructions
1.
To ensure correct operation, user has to read this
instruction manual to make himself familiar with
the handling of the equipment. Users insufficiently
informed will risk danger to themselves as well as
others due to improper handling.
2.
Never
allow
instructions, people (including children) with
reduced physical, sensory or mental capabilities,
or lack of experience and knowledge to use the
equipment. Local regulations can restrict the age
of the operator.
3.
Use the equipment with the utmost care and
attention.
4.
Operate the equipment only if you are in good
physical condition. Perform all work calmly and
carefully. Use common sense and keep in mind that
the operator or user is responsible for accidents or
hazards occurring to other people or their property.
5.
Never
operate
especially children, or pets are nearby.
6.
Never use the equipment after consumption of
alcohol or drugs, or if feeling tired or ill.
7.
The motor is to be switched off immediately in
case that the equipment shows any problem or
abnormal sign.
8.
Switch off and remove the battery cartridge when
resting
and
when
unattended, and place it in a safe location to
prevent danger to others or damage to the
equipment.
9.
Don't force the equipment. It will do the job better
and with less likelihood of a risk of injury at the
rate for which it was designed.
10. Don't overreach. Keep proper footing and
balance at all times.
Personal protective equipment
1.
Dress Properly. The clothing worn should be
functional and appropriate, i.e. it should be tight-
fitting but not cause hindrance. Do not wear either
jewelry or clothing which could become entangled.
Wear protective hair covering to contain long hair.
people
unfamiliar
with
the
machine
while
leaving
the
GEB070-2
2.
Wear eye protection and stout shoes at all times
while operating the machine.
Electrical and battery safety
1.
Avoid dangerous environment. Don't use the
equipment in damp or wet locations or expose it
to rain. Water entering an equipment will increase
the risk of electric shock.
2.
Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create a risk of fire when
used with another battery pack.
3.
Use power tools only with specifically designated
battery packs. Use of any other battery packs
may create a risk of injury and fire.
4.
When battery pack is not in use, keep it away
from other metal objects, like paper clips, coins,
keys, nails, screws or other small metal objects,
that can make a connection from one terminal to
these
another. Shorting the battery terminals together
may cause burns or a fire.
5.
Under abusive conditions, liquid may be ejected
from the battery; avoid contact. If contact
accidentally occurs, flush with water. If liquid
contacts eyes, additionally seek medical help.
Liquid ejected from the battery may cause
irritation or burns.
6.
Do not dispose of the battery(ies) in a fire. The
cell may explode. Check with local codes for
possible special disposal instructions.
7.
Do not open or mutilate the battery(ies).
Released electrolyte is corrosive and may cause
people,
damage to the eyes or skin. It may be toxic if
swallowed.
Starting up the equipment
1.
Make sure that there are no children or other
people nearby, also pay attention to any animals
in the working vicinity. Otherwise stop using the
equipment.
2.
Before use always check that the equipment is
equipment
safe for operation. Check the security of the cutting
tool and the guard and the switch trigger/lever for
easy and proper action. Check for clean and dry
handles and test the function of the start/stop.
3.
Check damaged parts before further use of the
equipment. A guard or other part that is damaged
should be carefully checked to determine that it
will operate properly and perform its intended
function. Check for alignment of moving parts,
binding of moving parts, breakage of parts,
mounting, and any other condition that may affect
its operation. A guard or other part that is
damaged should be properly repaired or replaced
by our authorized service center unless indicated
elsewhere in this manual.
5
Publicidad
Tabla de contenido
