Publicidad
Idiomas disponibles
Idiomas disponibles
3)
If a straight section in the heater supply hose is not available, use the hose adapter parts (C & D) provided
in the kit to remotely locate the Heater Manifold (A) in a suitable location. The Heater Manifold can be located
in any orientation. Engine coolant can flow in either direction through it. Be sure to properly secure all
connections with hose clamps (H).
(ENGINE)
4) Install the Heater Manifold (A) into the hose and secure
ends with clamps (H). Secure the unit inside the engine
compartment with the large cable ties (F) provided.
5) Locate the windshield washer fluid line routed
between the pump and the nozzles. Inspect for an
existing splice location. If a splice is not available,
the line can be cut to create one.
If your vehicle has rigid nylon washer lines, follow
the instructions in Step 9.
5/9/14
HEATER
SUPPLY
HOSE
3 of 5
(ENGINE)
HEATER
SUPPLY
HOSE
Publicidad
