Cleaning And Maintenance; Troubleshooting - cecotec GRANDHEAT 2000 FLATBED BLACK Manual De Instrucciones

ENGLISH
If the door is opened during operation, press start to resume operation.
After a program is set, if Start is not pressed within 1 minutes, the settings will be cancelled.
After a program is finished, the device will beep every 2 minutes for 10 minutes.
In standby mode, press Stop/Cancel for 3 seconds or if there is no operation within 10 minutes,
the screen will turn automatically off. Press any key to turn the display on again.

5. CLEANING AND MAINTENANCE

The device, as well as food rests, must be cleaned and removed regularly.
Unplug the cable from the power supply before starting the cleaning. Do not immerse the
product in water or any other fluid during cleaning.
The lack of maintenance and cleaning of the product may cause a deterioration on its surface
and affect its lifespan.
Do not use strong detergents, powder abrasives or metal brushes to clean the device.
Do not remove the mica plate.
When the microwave has been used for a long time, some strong odours may arise from inside.
In order to get rid of them, follow one of the steps below:
Place several lemon slices in a cup and heat them at high power for 2 or 3 minutes.
Place a cup of red tea inside the microwaves and heat it at high power for 2 or 3 minutes.
Place orange peels inside the microwaves and heat it at high power for 1 minute.
Use a dampened soft cloth to clean enclosures, door, interior walls and the door frame.
Warning: All maintenance tasks must be strictly carried out by qualified technical personnel.

6. TROUBLESHOOTING

Problem
The device does not turn on
The device does no heat
Dim microwave light
58 GRANDHEAT 2000 FLATBED BLACK/WHITE
Cause
The power cord is not
plugged in properly.
Fuse blow or short circuit.
Faulty power outlet.
Door not closed properly.
In low power microwave
operation, the device light
may become dim.
Solution
Disconnect it and connect it
again after 10 seconds.
Contact the Technical Support
Service of Cecotec.
Test the power outlet with a
different appliance.
Close the door properly.
It is normal and does not
affect the device operation.