Sanus BFAV48 Manual De Instrucciones página 5

2 Center Assembly to Base
2-1
Insert fourteen dowels [14] into the
fourteen holes in the base [04].
[04]
2-3
HEAVY! You will need assistance with this
step.
Holding the back panel [08] in place, carefully lower
the center assembly and back panel [08] onto the
base [04], fi tting the holes of the side panels onto
the dowels [14] in the base [04] and the keys of the
side panels [01] and [02] into the keyholes of the
base [04]. The bottom of the back panel [08] will fi t
into the slot in the rear of the base [04].
[02]
[14]
6901-002089 <02>
[14]
[01]
[04]
2-2
[01]
[08]
2-4
[04]
[08]
Slide the large back panel [08] into the
slots at the back of the side panels [01]
and [02].
[03]
Turn the key tabs of the locks until they fi t
in the slots of the locks and are fl ush with
the surface of the locks. Make sure that
the center assembly is secure on the base
[04].
[02]
5