Battery And Mains (Option); Setting Up The Scale - Seca 336 Manual De Instrucciones Y Garantía

Battery and mains (option)

bAtt
If or
1.5 V type AA, R6 or LR6 round-cell batteries.
– Carefully turn over the scale so that the
base of the scale is accessible.
– Press the latches of the battery com-
partment towards the centre of the
base and take off the cover.
– Place the new batteries in the battery
compartment.
Check that polarity is correct!
– Close the cover and then turn the scale
back up the right way.

4. Setting up the scale

The scale is fully assembled on delivery.
– Remove the packaging and place the
scale on a firm, level surface.
– Undo the locknuts using the four foot
screws (1).
– Align the scale by undoing the foot
screws. The air bubble in the spirit level
must be right in the centre of the
circle (2).
– Then re-tighten the locknuts (3).
– Ensure that only the feet of the scale are
in contact with the floor. The scale may
not be in contact at any other point.
Model 336
appear in the display, you should change the batteries. You need 6
Connection for
mains unit
1 .
2 .
Libelle
Spirit level
Battery
compartment
3 .
13
GB