Metra 99-7627HG Instrucciones De Instalación página 10

Screen Operation
System INFO:
• To access the current software of this product after it has been installed.
• Go to - SETTINGS>MISCELLANEOUS>SYSTEM INFORMATION
• Please have this information available when calling tech support for assistance.
99-7627HG
Updating the 99-7627
• Download and install the WebXXpress software update from
axxessinterfaces.com.
• Connect the USB-MINI-CAB update cable (sold separately) between the
99-7627 and the computer. The cable will connect into the port on the rear of
the kit labeled "A".
Note: The 99-7627 will need to be powered up to be updated.
• From the Start Menu of the computer, click on "USB Bootloader", and then click
"Update Board". The software will begin to download at this point.
Note: If 30 seconds elapses before you finish this step, you will need to
remove power from the 99-7627, then reapply power, and then start the
update process again.
Note: Please note which firmware downloaded to the interface. This will
help in troubleshooting, if need be.
10