Metra 99-7627HG Instrucciones De Instalación página 6

For models without a BOSE sound-system:
• Connect the White wire to the left front positive speaker output.
• Connect the White/Black wire to the left front negative speaker output.
• Connect the Gray wire to the right front positive speaker output.
• Connect the Gray/Black wire to the right front negative speaker output.
• Connect the Green wire to the left rear positive speaker output.
• Connect the Green/Black wire to the left rear negative speaker output.
• Connect the Purple wire to the right rear positive speaker output.
• Connect the Purple/Black wire to the right rear negative speaker output.
For models with a BOSE sound-system:
• Tape off and disregard the White, White/Black, Gray, Gray/Black, Green,
Green/Black, Purple, Purple/Black wires, they will not be used in this
application.
• If you wish to retain the factory AUX-IN jack, connect the Red and White RCA
jacks labeled "AUX input", to the AUX-IN jack (if applicable).
• Tape off and disregard the Red and White RCA jacks labeled "FROM DVD", they
will not be used in this application.
• Tape off and disregard the Yellow RCA jack labeled FROM DVD, it will not be
used in this application.
99-7627HG
Connections to be made
• If you wish to add an aftermarket backup camera or external video source,
connect the Yellow RCA jack labeled "Backcam" into the desired source.
• 12-pin pre-wired ASWC-1 harness:
This harness is to be used along with the optional ASWC-1 (not included) to
retain steering wheel audio controls. If the ASWC-1 is not being used, disregard
this harness. If it will be used, please refer to the ASWC-1 instructions for radio
connections and programming.
Note: Disregard the harness that comes with the ASWC-1.
Note: Disregard the RCA jack labeled "FROM DVD",
it will not be used in this application.
From the 12-pin harness with (4) jacks to the aftermarket radio
(for BOSE sound-systems only):
• Connect the Blue/White wire to the amp turn on wire (this wire must be
connected to hear sound from the factory amplifier).
• Connect the White, Gray, Green, and Purple RCA jacks to the audio outputs.
White is left front, Gray is right front, Green is left rear, and Purple is right rear.
6