Sinbo SHB 3089 Manual De Instrucciones página 9

Tabla de contenido

Publicidad

Idiomas disponibles
  • MX

Idiomas disponibles

  • MEXICANO, página 22
it clockwise.
4. Place the jug (D)onto the blender body (E)
5. Secure the jug (D) by turning it anticlockwise.
6. Connect it to the electrical supply and select the required speed using the rotary switch.
The following settings are available:
P= Pulse operation
O= Power off
1= Low Speed
2= High Speed
Recommendations when blending
Ingredients
Max Run Time (Seconds)
Liquids
Semi Liquids
• Semi liquids assumes maximum of 250 grams of fruits vegetables or ice in 2.5 x 2.5cm cubes along
with 500ml of water or any other liquid of similar consistency.
Note: the blender should not be run for longer than 1 minute after a continuous run of 1minute the
blender should be allowed to cool down for at least 2 minutes before further use.
Useful advice
Note: Do not exceed the maximum capacity of 1.5 litres.
• When blending is compete return the control knob to the off (0)position
• Once the blade has come to a complete stop lift the jug (D)from the blender body (I)
• Remove the lid (B)and pour the ingredients into a suitable container
• Liquids can be poured through the pouring sport (C) by lifting the sport cover
Note: Ingredients can be added by inserting them through the hole left when the filler cap(A)is removed.
Warning! Never operate the blender without the lid (B) fitted.
Warning! Do not use any of the accessories without the required seal.
Maintenance & cleaning
• Switch the appliance off remove the plug from the wall socket and wait until the blade has stopped
rotating.
• The appliance is easier to clean if you do so immediately after use.
• Do not use abrasive cleaning agents.
• Scourers acetone alcohol etc to clean the appliance.
• All detachable part are dishwasher-safe.
• Place the detachable plastic parts on the top tray of the dishwasher. Make sure they are placed well
away from the heating element.
• All removable parts can be cleaned with a cleaning brush in warm water with some washing –up
liquid and rinse them under the tap.
• Remove the dirty parts from the motor unit. Clean the motor unit with a damp cloth.
• Never immerse the motor unit in water nor rinse it under the tap.
Protecting the environment
Separate collection. This product must not be disposed of with normal household waste.
Should you find one day that your product needs replacement or if it is of no further use to you
do not dispose of it with other household waste make this product available for separate collection.
Speed
20 sec
1
10 sec
2
- 8 -
Max Quantity (ml)
50g
50g

Publicidad

Tabla de contenido
loading

Tabla de contenido