How To Charge The Battery - flir i5 Manual De Instrucciones

battery compartment. Note: Do not
use conductive tools when doing this.
en-US
3 Push the battery into place.
4 Replace the cover to close the battery
compartment.

How to charge the battery

You must charge the battery inside the
camera for four full hours (or until the
battery indicator displays a green light)
before you use the camera for the first time.
Charge the battery by connecting the
power supply to the power connector on
the camera. Note: The first time you charge
a factory-new battery you must turn on and
then turn off the camera after you have
connected the power supply to the power
connector on the camera.
1 Battery indicator
2 Power supply cable
Quick Start Guide
Follow this procedure to start immediately:
1 Insert a miniSD™ Memory Card into the
card slot.
2 Push the On/Off button to turn on the
camera. Note: If the camera does not
start, push the reset button with a non-
conductive tool. The reset button is
located beside the battery connector,
inside the battery compartment. Then
push the On/Off button again.
3 Open the lens cap by pushing the lens
cap lever.
4 Aim the camera toward your target of
interest.
5 Pull the save trigger to save the image.