Taking Advantage Of The Sound Fields; Customizing Sound Fields - Sony TA-VE700 Manual De Instrucciones

Using Surround Sound
Taking Advantage of the
Sound Fields
How can you customize the sound fields?
Each sound field is composed of sound parameters —
variables of sound that create sound image. You can
customize the sound fields by adjusting some of the
sound parameters to best suit your listening situation.
See the following chart for the adjustable sound
parameters.
Once you customize the sound fields, they are stored in
memory unless the amplifier is unplugged for about 1
week.
The adjustable parameters for each sound field are
shown on the charts below.
PRO LOGIC
MOVIE
MUSIC 1
MUSIC 2
SPORTS
GAME
Note
The EFFECT parameter allows you to adjust the overall
presence of the sound field.
Before you get started
To take advantage of Dolby Pro Logic Surround sound,
go to "Getting the Most Out of Dolby Pro Logic
Surround Sound" on page 13. This section describes
how to adjust the levels of your speaker system and
customize the DOLBY SUR sound field.
12 EN
PRO LOGIC
ENHANCED
SMALL THEATER
LARGE THEATER
MONO MOVIE
SMALL HALL
LARGE HALL
KARAOKE
ACOUSTIC
ARENA
STADIUM
GAME

Customizing Sound Fields

You can customize the sound fields by adjusting the
tone (bass or treble) and surround sound parameters
while listening to a programme source. The adjusted
parameters are stored in memory automatically and
you can use your custom sound fields just as you
would use the pre-programmed ones. Before you start,
select the sound field you want to customize and start
playing a programme.
TONE ON/OFF DPC MODE
Digital processing TONE indicator
control buttons
Adjusting the tone parameter
Adjust the tone (bass or treble) of the front, centre and
rear speakers for optimum sound. You can adjust the
tone of all sounds fields, including Dolby Surround.
1
Press TONE ON/OFF so that TONE ON appears
in the display.
2
Press DPC MODE repeatedly until the TONE
indicator lights up.
3
Use the digital processing control buttons (
) to select BASS or TREBLE.
4
Use the digital processing control buttons ( / )
to adjust the tone level.
The adjusted tone level is stored automatically.
You can turn off the tone adjustments without
erasing them
The tone adjustments and on/off setting are stored in
each sound field. Press TONE ON/OFF to turn the tone
parameter off or on.
SUR indicator
/