STARFRIT 024603 Instrucciones De Uso página 25

cause metal to warp, resulting in an uneven bottom. Let cookware cool down on
its own or place in lukewarm soapy water.
• Always use trivets or oven mitts when handling the pot.
• DO NOT place the cooking pot on countertop, as it will stain or burn the
countertop. Use a protective trivet.
• DO NOT place the pot on any range top burner, under a broiler, microwave
browning element, or in a heated oven.
• DO NOT strike utensils against rim of pot to dislodge food, as it will scratch it.
• DO NOT use metal utensils with this appliance. Use the provided rice measure (or
recommended utensil) to prevent chipping of the cooking pot.
• DO NOT use scouring pads, abrasive cleaners, or any object that will scratch the
cookware or accessories.
• Any other servicing should be performed by an authorized service representative.
TROUBLESHOOTING
The pressure cooker is equipped with safety feature that will advise you and shut the
unit down if an abnormal condition is encountered during pressure or slow cooking.
An error signal will be displayed on the control panel. Depending on the error, audible
beeping may be heard. Once the problem has been identified unplug the unit and
contact the customer service if no solution can help in the following table.
DESCRIPTION
Lid does not lock or steam air
escapes from the rim of the lid.
Air escapes from the float valve.
Cannot open the lid after air
exhaust
Error code appear on the control
panel (E4)
Error code appear on the control
panel (E1, E2 or E3)
The sealing ring assemble is not properly installed in lid.
Reinstall the sealing ring, follow the instruction FIG. 4.
Make sure the float pressure valve is well place and install.
The float pressure valve is still up, press on the float
Air leakage, check if the seal is well placed. If the message
appears again, please contact Customer Service:
starfrit.com/en/contact-us
Please contact Customer Service:
starfrit.com/en/contact-us
SOLUTION
Refer FIG. 3.
pressure valve.
25