Engine Oil Replacement; Air Filter - Pramac Powermate EM1200 Manual Del Usuario

2）ENGINE OIL REPLACEMENT
13. Place the machine on a level surface and warm up the engine
for several minutes. Then stop the engine.
14. Remove the oil filler cap
15. Place an oil pan under the engine. Remove the oil drain plug so
that the oil can be completely drained.
16. Check the oil drain plug, gasket, oil filler cap and O-ring. If damaged replace.
17. Reinstall the oil drain plug.
18. Add engine oil to the upper level.
• Recommended engine oil:
SAE 10W-40.
CAUTION: ─────────────
Be sure no foreign material enters the crankcase.
──────────────────
3）AIR FILTER
Maintaining an air cleaner in proper condition is very important. Dirt
induced through improperly installed, improperly serviced, or
inadequate elements damages and wears out engines. Keep the
element always clean.
Open the air filter, clean all components.
After wetting the element by clean engine oil, squeeze it
tight.
Lastly, install all components securely.
CAUTION: ───────────────────
─
The engine should never run without the element; excessive piston and/or cylinder wear may result.
────────────────────────
Nut
Nut
Filter element
Dry element