5.2 Heating baby food
Type
Bottle 150 ml (standard neck) PP
150 ml (wide neck) PP
250 ml (standard neck) PP
300 ml (wide neck) PP
120 ml (standard neck) glas
240 ml (wide neck) glas
Jar
125 g / 130 g
190 g / 200 g
* Contents at room temperature
** Contents at refrigerator temperature
Note:
• The time taken to heat up the food and its
temperature will depend on the quantity of
water.
• Please place the bottle/jar as near to the
centre of the device as possible.
• The quantities of water quoted are a guide to
heating liquid to drinking temperature. The
different natures of food and of containers
mean we are unable to specify an exact
quantity of water to heat up. Just experiment,
and you will soon find the best quantity of
water.
Caution! Do not heat frozen food, as this may
cause the jar or bottle to explode. Allow frozen
food to thaw in the refrigerator or at room
temperature before heating it.
(1 teaspoon ≈ 5 ml)
Quantity of water
"Home" mode
ca. 20 °C* ca. 4 °C** ca. 20 °C* ca. 4 °C** Basket
20 ml
30 ml
22 ml
32 ml
22 ml
34 ml
20 ml
28 ml
12 ml
18 ml
11 ml
14 ml
11 ml
14 ml
11 ml
14 ml
1. Measure up the required quantity of water
with a suitable measuring container.
Note: The quantity of water evaporating
affects the final temperature of the food, so
accurate measuring is important.
2. Pour the measured quantity of water into the
base 8 (see Fig. A).
3. Put the open baby bottle or open jar in the
basket 2 (see Fig. B)
4. If possible, insert the ring 1 on the bottle to
limit the escape of water vapor (see Fig.B).
5. Check wether you selected the correct mode
(see
switching on and off" on page 22).
6. Connect the device to the power supply
(see Fig. C):
– connect the mains plug 4 to a
suitable mains socket.
23
"Car" mode
10 ml
15 ml
13 ml
15 ml
14 ml
18 ml
12 ml
16 ml
9 ml
10 ml
8 ml
9 ml
6 ml
8 ml
7 ml
10 ml
"5.1 Select
the
operating
Accessories
Ring
G
X
X
B
X
X
X
X
X
X
X
X
X
X
X
X
X
X
mode,