Kit Preparation; Kit Assembly - Metra 99-7339B Instrucciones De Instalación

Kit Preparation

From the factory radio/climate control panel:
1. Remove the (4) Phillips screws securing the climate controls, and then remove.
2. Unclip and remove the hazard/passenger airbag light assembly.
To the 99-7339 trim panel:
1. Secure the climate controls using
the factory hardware.
2. Attach the hazard/passenger airbag
light assembly.
3. Attach the (6) panel clips provided.
Continue to Kit Assembly
®
99-7339
ISO DIN radio provision with pocket
1. Remove the metal DIN sleeve and
trim ring from the aftermarket radio.
2. Secure the radio brackets to the
radio using the screws supplied
with the radio. (Figure A)
3. Secure the pocket to the bracket/
radio assembly using the (4) #8
x 3/8" Phillips screws provided.
(Figure B)
4. Locate the factory wiring harness
and antenna connector in the
dash. Metra recommends using
the proper mating adapter from
Metra or AXXESS. Test the radio for
proper operation.
5. Secure the completed assembly to
the sub-dash.
6. Reassemble the dash in reverse
order of disassembly using the
99-7339 trim panel.
3

Kit Assembly

(Figure A)
(Figure B)