Metra 95-6554B Instrucciones De Instalación página 4

For all other radios:
1. Remove (4) Phillips screws securing
the climate controls. Partially slide the
controls out and move down slightly.
(Figure A)
2. Cut the sub-dash to allow room for
the aftermarket radio. Take note that
"mechless" radios may require less
cutting. It is highly suggested to assess
the design of the radio and only cut
what is truly required to fit the radio
into the dash. (Figure B)
3. Apply tape over all areas cut. (Figure C)
4. Secure the climate controls back to the
vehicle using just the (2) lower screws.
The upper screws will be reused in
Kit Assembly.
Continue to Kit Assembly
4
KIT PREPARATION
(Figure A)
(CONT.)
Remove shaded areas
(Figure B)
Tape over the cut areas
(Figure C)
|
1.800.221.0932 MetraOnline.com